Current Project – Work in Progress! Increasing the accessibility of sustainable shaving to the majority of users b...
Read More
The tool caddy stores worksite hand tools using waste Tyvek sheets commonly found on construction sites. 3 Week Project ...
Read MoreTyvek Tool Caddy – Waste Stream Product
3 month project based on consumer heating. This was a fun project and some is shown below Full report and Appendix. &nbs...
Read MoreDP403 Summary
This project was based around moving homes constantly. Our aim was to produce collapsible furniture that could be easily...
Read MoreDP402 Summary
A series of week long based projects each on Form (Mouse), Surface (Tiles), Proportions (Turning) and Detail (Spatula) M...
Read MoreDP401 Summary
This is some of the work completed for my A-level Multi tool Project in 2017/18. Full project available here I have incl...
Read MoreA-Level DIY Multi Tool
Various modifications and improvements made to my Land Rover either in progress or completed. Summer 2018 Swapping Sprin...
Read MoreLand Rover Project
The final week task was to program a robot which would move by itself and avoid objects Unfortunately this wasn’t ...
Read MoreArduino – Week 4 – Robot
Arduino LCD Displays Wire up the arduino using these following instructions VCC (Red) to 5V Ground/GND (Black) to GND SD...
Read MoreArduino – Week 3 – Displays and Ultrasonic sensors
What is a stepper motor? A stepper motor uses opposing electromagnets to create rotation. The different number of steps ...
Read MoreArduino – Week 2 – Stepper Motors
Pulse Width Modulation Using ‘unsigned char’ to replace values > ‘unsigned char’...
Read MoreArduino – Week 1 – Software Notes
Design Rules for CNC/casting Most important is to know your cutter shape and size. Any features have to be designed in a...
Read MoreWeek 8 – Fusion 360 CAM for mould-making and casting
3d Scanning can be done in multiple ways and at multiple price points, either with handheld scanner for an iPad all the ...
Read MoreWeek 7 – 3D scanning and printing
The task this week was to program the board that we made using the CNC router. There are several levels to this week, so...
Read MoreWeek 6 – Embedded programmer
The task this week was to create the schematic, board layout and then mill the simple LED circuit board. Autodesk Eagle ...
Read MoreWeek 5 : Electronics Design
Surface mount components are very common and are what the majority of manufacturers will use due to the smaller size, co...
Read MoreWeek 4 : Electronic Production
Task: Produce a press fit kit (accounting for kerf) using the laser cutter Making the Design The main aim is to use para...
Read MoreWeek 3 : Laser cutter: computer-controlled cutting (CNC)
Parameters are used to define a sketch and easily edit it later on. It is basically using a smart dimension but that can...
Read MoreParameters in Fusion 360
The task this week was to make on Fusion 360 a version of our tile, render it and display it as a pattern of 9. Method S...
Read MoreWeek 2 : CAD, Manufacturing and Modelling
Help Menu > Solidworks tutorials is a good place to go if stuck GrabCAD is an online source of downloadable CAD files...
Read MoreSolidworks Notes
Making the dice is about learning Fusion 360 and using as many different techniques as possible My original method is as...
Read MoreDice making Fusion 360
I decided to use a mind map for the DP403 projects research analysis and wanted to record the process for future referen...
Read MoreMind Mapping
Everything must have a dimension to lock it in place- blue lines indicate something that hasn’t been dimensioned C...
Read MoreFusion 360 Notes
This week task was to create our own web page by either using edublogs or another website software. I chose to go with e...
Read More